16
VQT4Q15
∫ HDMI
≥
Use
the ARC compatible
High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
The HDMI-compliant cable is supplied with this unit.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
≥
Audio will be output through the system’s speakers when “Off” is selected in “HDMI Audio Output”. (
>
39)
∫ TV Audio
≥ To output TV audio from this unit's speakers, you need to switch the selector. (> 22)
∫ OPTICAL IN
≥ After making the digital audio connection, make settings to suit the type of audio from your digital
equipment. (> 39)
*1
If the HDMI terminal on the TV is labelled “HDMI (ARC)”, the connection of the optical digital audio cable is not required.
*2
It is also possible to use an audio cable instead of the optical digital audio cable. In this case, connect the AUX terminal on
the main unit with the audio output terminal on the TV.
≥ Use an FM outdoor antenna if radio reception is poor.
Connecting to a TV
What is ARC?
ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home
theatre system to receive and play audio from the TV through a single HDMI cable without additional wiring.
OPTICAL
OUT
L
R
AUDIO OUT
AV IN
HDMI cable (supplied)
Optical digital audio cable*
1
(not supplied)
Audio cable*
2
(not supplied)
FM antenna connection
Affix this end of the antenna to a wall or pillar where
the reception is best.
FM indoor antenna (supplied)
SC-BTT880&480&460&400&300GNGSGA-VQT4Q15_mst.book 16 ページ ２０１２年１２月４日 火曜日 午後３時５０分
To Next Page
Loading...
