19
Getting started
VQT4Q15
STEP 4: Connecting the AC mains lead
Connect only after all other connections are complete.
≥ The wireless system ([BTT880]) and the main unit consume a small amount of AC power (> 51, 53)
even when turned off. For the purpose of power conservation, the unit can be disconnected if you will
not be using it for extended period of time.
STEP 5: [BTT880] Preparing the wireless system
Turn on the wireless system after all connections are complete.
[For]the]Middle]East]and]South]East]Asia]
2 AC mains leads are supplied.
Use the AC mains lead that matches the socket for the area you live in.
≥ In Saudi Arabia, always use the 3-pin AC mains lead.
≥
AC mains lead with a label is for Thailand. AC mains lead without a label is for areas other than Thailand.
[BTT880]
[BTT480] [BTT460] [BTT400] [BTT300]
Wireless system
AC mains lead (supplied)
To a household mains socket
To a household mains socket
AC mains lead (supplied)
The cord with a ferrite core is for
the wireless system.
To a household mains socket
AC mains lead
(supplied)
e.g.,
Wireless
system
Press [C I, BÍ] on the wireless system.
C I: The wireless system is on.
BÍ: The wireless system is off.
The wireless system consumes a small amount of power, even when it is off.
WIRELESS LINK indicator
Red
: The wireless system is on and the wireless link is deactivated.
Green
: The wireless system is on and the wireless link is activated.
SC-BTT880&480&460&400&300GNGSGA-VQT4Q15_mst.book 19 ページ ２０１２年１２月４日 火曜日 午後３時５０分
To Next Page
Loading...
