45
Advanced operations
VQT4Q15
[BTT300] Centre speaker
[BTT880] [BTT480]
Front speaker, Surround speaker
[BTT460] Front speaker
Attach to a wall without the base and the stand.
≥ Reattaching the speaker cable to the stand
[BTT460] Surround speaker
[BTT400] Front speaker, Surround speaker
[BTT300] Front speaker, Surround speaker
Preventing tipping
[BTT880] [BTT480] Front speaker, Surround speaker
[BTT460] Front speaker
Preventing falling
Front speaker, Surround speaker, Centre speaker
1 Thread a string to the speaker.
≥ Use a string of less than ‰ 2.0 mm, which is
capable of supporting over 10 kg.
e.g., [BTT880] [BTT480] [BTT460] Front speaker
A String (not supplied)
B Rear of the speaker
2 Thread a string from the wall to the
speaker and tie tightly.
C Screw eye (not supplied)
D Wall or pillar
E Approx.150 mm
F Approx.120 mm
D 18 mm E 24 mm
F
95.5 mm
G 27 mm
H 45 mm I 22 mm J 330 mm
K 40 mm L 41 mm
Straighten the
cable and run
through the stand.
Pull out the cable
through the hole.
180 mm
M 40 mm N 24 mm
To prevent tipping/falling of the
speakers
When mounted on a wall
When placed on the floor
SC-BTT880&480&460&400&300GNGSGA-VQT4Q15_mst.book 45 ページ ２０１２年１２月４日 火曜日 午後３時５０分
To Next Page
Loading...
