To Next PageTo Next PageHow to fix no sound on Panasonic SC-DK20?
If your Panasonic Stereo System has no sound, first, increase the volume. If that doesn't work, the speaker cables may be shorted. Turn off the unit, check and correct the speaker connections, and then turn the unit back on.
What to do if Panasonic SC-DK20 remote control doesn't work?
If the remote control for your Panasonic Stereo System isn’t working, check if the batteries are correctly inserted. If they are, try replacing them with new ones.
How to stop noise from Panasonic SC-DK20 Stereo System?
If you are experiencing noise, a flickering stereo indicator, or distorted sound with your Panasonic Stereo System, use an outdoor antenna.
How to stop beat sound on Panasonic SC-DK20?
If you hear a beat sound or a low hum during AM broadcasts on your Panasonic Stereo System, turn off the TV or move it away from the unit. Also, separate the antenna from other cables and cords.
What to do if Panasonic SC-DK20 Stereo System displays ERROR?
If your Panasonic Stereo System displays “ERROR” or “––:––”, try reversing the AC power supply cord’s plug (if possible). If that doesn't work, you may have performed an incorrect operation. Read the instructions and try again. This can also occur after plugging in the power cord for the first time or after a recent power failure.
What does F61 mean on Panasonic SC-DK20 Stereo System?
If your Panasonic Stereo System displays “F61”, starts up after being turned off, or shows “DTS NO AUDIO”, set the time. Then, check and correct the speaker cord connections. If the problem persists, it indicates a power supply issue, and you should consult a dealer. Also, check if the demonstration feature (DEMO) is turned on and disable it if not needed.
Why does my Panasonic SC-DK20 picture on TV disappear?
If the picture on your TV disappears or stripes appear when using the Panasonic Stereo System, the antenna's location or orientation may be incorrect. If you're using an indoor antenna, switch to an outdoor one. Also, ensure the TV antenna wire is separated from the unit.
Why does Panasonic Stereo System say TAKE OUT DISC?
If your Panasonic Stereo System displays “TAKE OUT/DISC” or the picture doesn't appear on the TV when playing a DVD or Video CD, condensation may have formed inside the unit due to a sudden temperature change. Wait about an hour for it to clear and try again. If that doesn't work, there may be a problem with the disc mechanism (possibly due to a power failure). The tray will open automatically; remove the disc, ensure the tray is empty, and then close it. The unit will make disc-changing noises for a few moments and should then operate normally. Also, ensure the disc's region number matches the unit's region number.
General| Speaker Configuration | 2.0 |
|---|---|
| CD Player | Yes |
| FM Tuner | Yes |
| Bluetooth | No |
| USB Port | No |
| Number of Discs | 1 |
| Radio | FM |
| WMA Playback | No |
| Remote Control | Yes |
| Playable Media | CD, CD-R |
| RMS Output Power | 20W per channel |
| Dimensions | 290 x 180 x 270 mm |
Information on DVD region codes for playback compatibility with different countries.
Crucial guidelines to prevent fire, electric shock, and product damage during operation.
Guide to positioning speakers and subwoofer for optimal sound placement.
Instructions for connecting speakers and the TV to the main unit.
Connecting antennas and the AC power cord, including voltage setting.
Basic steps for playing DVDs, VCDs, and CDs.
Navigating menus to select and play MP3 tracks from discs.
How to repeat tracks, titles, or entire discs for continuous playback.
Using EQ settings to alter sound quality and create specific audio effects.
Explains Dolby Digital, Pro Logic, and Super Surround features for immersive audio.
Solutions for common problems encountered with the unit's operation.
Contact information and locations for authorized service centers in the USA.
