To Next Page
J
James SmithSep 9, 2025
What does “ERROR” mean on my Panasonic SC-EN38DB display?
- EElizabeth MccoySep 9, 2025
If your Panasonic Stereo System displays “ERROR”, it means an incorrect operation was performed. Read the instructions and try again.
What does “ERROR” mean on my Panasonic SC-EN38DB display?
If your Panasonic Stereo System displays “ERROR”, it means an incorrect operation was performed. Read the instructions and try again.
What to do if I am unable to use PC Sync with my Panasonic SC-EN38DB?
If you are unable to use PC Sync with your Panasonic Stereo System, turn the unit on. Also, check the PC and iPod connections.
What to do if there is no response when [USB q/h] button is pressed on Panasonic SC-EN38DB?
If there is no response when the [USB q/h] button is pressed on your Panasonic Stereo System, disconnect the USB device and then reconnect it. Alternatively, turn the unit off and then back on.
How to fix a Panasonic SC-EN38DB Stereo System remote control that isn't working?
If your Panasonic Stereo System's remote control isn't working, make sure the batteries are correctly inserted. If the problem persists, the batteries may be worn out and need replacing.
How can I improve poor DAB reception on my Panasonic SC-EN38DB Stereo System?
If you experience poor DAB reception with your Panasonic Stereo System, keep the antenna away from computers, televisions, other cables, and cords. Consider using an outdoor antenna.
What to do if my Panasonic SC-EN38DB displays “NO PLAY”?
If your Panasonic Stereo System displays “NO PLAY”, check the content. Only MP3 format files can be played.
Why does the picture disappear or stripes appear on the television near my Panasonic SC-EN38DB?
If the picture on the television near your Panasonic Stereo System disappears or stripes appear on the screen, it could be due to the location and orientation of the antenna being incorrect or the television antenna wire being too close to the unit. Separate the antenna wire of the television from the unit.
Why do I hear a beat sound or noise while receiving a radio broadcast on my Panasonic SC-EN38DB Stereo System?
If you're hearing a beat sound or noise while receiving a radio broadcast on your Panasonic Stereo System, switch off the TV or other audio player or separate it from the unit. Also, switch off any portable audio player connected to the 'MUSIC PORT'.
What does “NO PLAY” mean on my Panasonic SC-EN38DB?
If your Panasonic Stereo System displays “NO PLAY”, it means a CD-ROM disc that is not CD-DA or MP3 format is inserted. It cannot be played.
Why does my Panasonic SC-EN38DB Stereo System display --:--?
If your Panasonic Stereo System displays '--:--', it means you plugged in the AC mains lead for the first time or there was a recent power failure. Set the time.
General| Power Output | 20W |
|---|---|
| Bluetooth | Yes |
| CD Player | Yes |
| FM Radio | Yes |
| USB Port | Yes |
| Tuner | FM |
| AUX Input | Yes |
| Headphone Jack | Yes |
| Remote Control | Yes |
| Speaker Type | 2-way speaker system |
| Playable Formats | MP3, WMA |
| Type | Micro Hi-Fi System |
