ENGLISH
RQT9567
10
10
Specifications
Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
5 W per channel (6
), 1 kHz, 10% THD
Total RMS stereo mode power 10 W
Tuner section
Preset station FM 30 stations
Frequency modulation (FM)
Frequency range
87.9 MHz to 107.9 MHz (200 kHz step)
87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals 75 (unbalanced)
Terminals section
iPod connector DC OUT 5 V, 1.0 A MAX
Headphones jack
Terminal Stereo, 3.5 mm (
1
/
8
″) jack
Disc section
Disc played [8 cm (3″) or 12 cm (5″)]
CD, CD-R/RW (CD-DA)
Pick up
Wavelength 790 nm (CD)
Laser power CLASS 1
Audio output (Disc)
Number of channels 2 ch (FL, FR)
FL = Front left channel
FR = Front right channel
Speaker section
Type 1 way, 1 speaker system (bass reflex)
Speaker unit(s)
Full range 8 cm (3
1
/
8
″) cone type x 1/ch
Impedance 6
General
Power supply AC 120 V, 60 Hz
Power consumption 14 W
Dimensions (W x H x D) 400 mm x 213 mm x 110 mm
(15
3
/
4
″ x 8
3
/
8
″ x 4
11
/
32
″)
[D = 72 mm (2
27
/
32
″) min]
[D = 144 mm (5
11
/
32
″) tray open]
Mass (Weight) 2 kg (4.4 lbs)
Operating temperature range 0°C to +40°C
(+32°F to +104°F)
Operating humidity range
35% to 80% RH (no condensation)
Power consumption in standby mode
0.1 W (approximate)
Note:
• Specifications are subject to change without notice.
Mass (weight) and dimensions are approximate.
• Total harmonic distortion is measured by the digital
spectrum analyzer.
Product service
1. Damage requiring service — The unit should be
serviced by qualified service personnel if:
(a) The AC power supply cord or the plug has been
damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a
marked change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond
that described in these operating instructions. Refer all
other servicing to authorized servicing personnel.
3. Replacement parts — When parts need replacing
ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics
as the original parts. Unauthorized substitutes may result
in fire, electric shock, or other hazards.
4. Safety check — After repairs or service, ask the servicer
to perform safety checks to confirm that the unit is in
proper working condition.
Product information
For product information or assistance with product operation:
Contact the Panasonic Canada Inc. Customer Care Centre at
1-800-561-5505, or visit the web site (www.panasonic.ca), or
an authorized Servicentre closest to you.
HC27_PC_1en.indd 10HC27_PC_1en.indd 10 12/22/2011 11:27:21 AM12/22/2011 11:27:21 AM