Panasonic SC-HT1500 - Tuning; Manual; Auto-Setup Restart, Download

51
RQT7621
SETTINGS
Refer to the control reference on page 48.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4, 2, 1] to select “SETUP”
and press [ENTER].
3 Press [3, 4] to select “Tuning” and
press [1].
You can restart auto channel setting if Preset Download or Auto-
Setup (➡ page 15, 16) fails for some reason.
∫ Auto-Setup Restart
4 Press [3, 4] to select “Auto-Setup
Restart” and press [ENTER].
5 Press [2, 1] to select “Yes” and
press [ENTER].
Auto-Setup starts.
∫ Download
4 Press [3, 4] to select “Download”
and press [ENTER].
5 Press [2, 1] to select “Yes” and
press [ENTER].
Download starts.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
You can add or delete channels, or change programme positions.
4 Press [3, 4]
to select
“Manual” and
press
[ENTER].
To delete a programme
position
Press [3, 4, 2, 1] to select a programme position and press [A].
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and press [B].
To move a TV station to another programme position
1 Press [ 3 , 4 , 2 , 1 ] to select a programme position and press [C].
2 Press [3, 4, 2, 1] to select the new programme position to
which you want to assign the TV station and press [ENTER].
[Note]
If Preset Download (➡page 15) has been performed, only deletion
of the programme position can be performed.
∫ To change the tuning settings for individual
programme position
5 Press [3, 4, 2, 1] to
select a programme
position and press
[ENTER].
Press [3, 4] to select an item and press [1].
Tuning
Auto-Setup Restart, Download
SETUP
Others
Tuning
Manual
Auto-Setup Restart
Download
Manual
Pos To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [ENTER].
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [ENTER].
If the station name needs a blank space, select
the blank between “Z” and “¢”.
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
[ENTER].
NICAM To select the type of sound to be recorded
Press [3, 4] to select “Auto” and press [ENTER].
≥Select “Off” if you want to record the normal
(mono) sound during a stereo, bilingual or
NICAM broadcast, or if the stereo sound is
distorted due to inferior reception conditions.
Title Page To enter the Teletext title page for a channel
Entering the title page number allows the unit to
automatically record programme and station names.
Press [3, 4] or the numbered buttons to enter
the title page number and press [ENTER].
≥To find the correct title page for the station, refer
to its Teletext TV guide.
≥The unit’s clock must be set correctly.
Manual Tuning
Pos Name Ch
ENTER
RETURN
SELECT
Pos Name Ch
B CA
Delete
Add
Move
1 BBC 1 22
2 BBC 2 23
3 ITV 24
4 CH4
25
5 CH5 26
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Pos
Name
Channel
Title Page
1
301
4
Auto
RETURN : leave
Manual
Tuning
BBC
SELECT
RETURN
NICAM
HT1500_EB.book 51 ページ ２００４年５月２８日 金曜日 午後１時４１分