Home theater connections
Step
Other
accessories
Stereo connection cable
(not included)
Left
Right
Coaxial cable
(not included)
Turn off all components before making any connections.
To connect equipment, refer to the appropriate operating instructions.
Changing the digital input settings
You can change the input settings for the digital terminals if
necessary. Note the equipment you have connected to the
terminals, then change the settings. One of the terminals will
remain unused, whatever the setting. (➡ page 8)
Use digital connection to enjoy Dolby Digital or DTS.
Do not bend the optical fiber cable.
•
•
•
Notes on digital input
This unit can decode the following signals:
Dolby Digital, DTS
PCM, including PCM with sampling frequencies of 96 or
88.2 kHz
It cannot decode:
Other digital signals, such as MPEG
Dolby Digital RF signals from a laser disc player
•
•
•
•
To Next Page
Loading...
Need help?
General
