file:///C|/Documents and Settings/lopez/Pulpit/s/PANASONIC SA-HT870E_EG_EB/ALL/SVC/s2000000000x.html
● Indicated voltage values are the standard values for the unit measured by the DC electronic
circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist
some errors in the voltage values, depending on theinternalimpedance of the DC circuit tester.
● Important safety notice:
Components identified by
mark have special characteristics important for safety.
Furthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound
(capacitors), low-noise (resistors), etc. are used.
When replacing any of components, be sure to use only manufacturer´s specified parts shown in
the parts list.
● The supply part number is described alone in the replacement parts list.
● Voltage and signal line
❍
: +B Signal line
❍
: CD-DA signal line
❍
: Main signal line
❍
: DVD (Video) signal line
file:///C|/Documents and Settings/lopez/Pulpit/s/PANASONIC SA-HT870E_EG_EB/ALL/SVC/s2000000000x.html (3 of 4)08-08-29 18:04:28
To Next Page
Loading...
