file:///C|/Documents and Settings/lopez/Pulpit/s/PANASONIC SA-HT870E_EG_EB/ALL/SVC/s1402000000.html
14.2 Service Mode Table 1
TOP PREVIOUS NEXT
The service modes can be activated by pressing various button combination on the player and remote
control unit.
Player buttons Remote control unit buttons Application Note
STOP 0 Error code display (Refer to the item, “14.3.
DVD Self
Diagnostic Function-Error Code ”).
5 Tilt adjustment Refer to the item “17.4. Optical
adjustment”).
6 Area number and broadcasting system
check
7 Built-in program version check
DISPLAY DVD laser drive current check Refer to the item “14.1.
Optical Pickup
Breakdown Diagnosis ”.
3 CD laser drive current check
PAUSE Writing of laser drive current value after
replacement of optical pickup (Do use
this function only when optical pickup is
replaced.)
10 Initialization of the player (factory
setting is restored.)
Used after replacement of micro-
computer and its peripherals and printed
circuit board.
TOP PREVIOUS NEXT
file:///C|/Documents and Settings/lopez/Pulpit/s/PANASONIC SA-HT870E_EG_EB/ALL/SVC/s1402000000.html08-08-29 18:03:21
To Next Page
Loading...
