Panasonic SC-HT990 User Manual (English)

Other manuals for Panasonic SC-HT990

Questions and Answers:

C
Christopher StoneAug 15, 2025
What to do if my Panasonic SC-HT990 Home Theater System has no picture or sound?
- M
  Melissa BonillaAug 15, 2025
  If your Panasonic Home Theater System isn't producing picture or sound, and the buttons aren't responding, it might be due to an external factor like lightning or static electricity. Try turning the unit off and then back on. Also, condensation may have formed; wait 1 to 2 hours for it to evaporate. Ensure the batteries in the remote are not depleted, and replace them if needed. Verify that the disc is compatible and has recorded content. As a last resort, you can initialize the unit by pressing and holding the stop button on the main unit and S10 on the remote until 'Initialized' disappears from the screen (while stopped and DVD/CD is the source).
T
thomassandovalAug 18, 2025
Why does my Panasonic SC-HT990 Home Theater System display “NO PLAY” or “NO DISC”?
- J
  Jacqueline KnightAug 18, 2025
  If your Panasonic Home Theater System displays “NO PLAY” or “NO DISC”, it could be due to several reasons. You might have inserted a disc the unit cannot play, a blank disc, or a disc that hasn't been finalized. Ensure you insert a disc that is compatible. Also, check if you have inserted a disc correctly. If the disc is dirty, wipe it clean. If none of these steps work, there may have been an error; try turning the unit off and then back on.
V
victoria55Aug 21, 2025
What to do if the picture is not displayed correctly on my Panasonic Home Theater System?
- T
  Thomas ShannonAug 21, 2025
  If the picture on your television is not displayed correctly when using your Panasonic Home Theater System, it could be due to a few reasons. The unit and television might be using different video systems; use a multi-system or NTSC television. If the disc system doesn't match your TV, the unit can convert NTSC signals to PAL 60 via the “NTSC Disc Output” setting in the “Video” tab. Also, keep other appliances and cables away from the main unit, as mobile telephone chargers can cause disturbance. You can also try changing “Source Select” in the Picture Menu. If the picture stops and you're playing DivX files larger than 2 GB, restore the zoom ratio to “k1.00” using “Manual Zoom” in the Display Menu.
S
Sarah GreenAug 25, 2025
How to fix ghosting when progressive output is on Panasonic SC-HT990?
- G
  Gary LeeAug 25, 2025
  If you're experiencing ghosting with progressive output on your Panasonic Home Theater System, it's likely due to the DVD-Video's editing method or material. Setting “Video Output Mode” in the Picture Menu to “480i” or “576i” should correct this. You can also press and hold [CANCEL] to switch to “480i” or “576i”.
M
Mary GreenAug 28, 2025
Why is there distorted sound or noise from my Panasonic Home Theater System?
- A
  Amanda GalvanAug 28, 2025
  If you're experiencing distorted sound or noise from your Panasonic Home Theater System, try the following: Adjust the position of the FM or AM antenna. Use an outdoor antenna. Turn the television off or move it away from the unit. Also, separate the antenna from other cables.
A
ann24Aug 31, 2025
Why does my Panasonic Home Theater System say “This disc may not be played in your region”?
- R
  raymondmontgomeryAug 31, 2025
  This message appears on your Panasonic Home Theater System because you are trying to play protected group or content, which you cannot play. You may be trying to display incompatible group or content. If you are trying to play DivX VOD content purchased with a different registration code, you cannot play the content on this unit.
B
Bradley LawrenceSep 3, 2025
What to do if my Panasonic SC-HT990 has no power?
- R
  Robert HermanSep 4, 2025
  If your Panasonic Home Theater System has no power and is automatically switched to standby mode, it may be because the Sleep timer was working and reached the set time limit. In this case, insert the AC mains lead securely.
Y
yballardSep 7, 2025
Why is Point B automatically set on my Panasonic Home Theater System?
- B
  Brenda BaileySep 7, 2025
  Point B is automatically set because the end of an item becomes point B when it is reached.
R
Robert DoyleSep 10, 2025
Why is the subtitle position wrong on my Panasonic SC-HT990?
- M
  Michelle LaneSep 10, 2025
  Subtitles may not be displayed depending on the disc. Adjust the position using the “Subtitle Position” setting in the Display Menu.

Panasonic SC-HT990 Specifications

General

RMS rated power	1000 W
Audio output channels	5.1 channels
Satellite speakers RMS power	4 W
Analog signal format system	NTSC
I/O ports	-Scart Terminal; -Component Video Out; -S-Video Out; -Video Out; -Music Port; -Audio In;
Weight	3350 g
Dimensions (WxDxH)	430 x 354 x 60 mm
Surround speaker weight	3700 g
Surround speaker dimensions (WxHxD)	252 x 234 x 1123 mm
Optical disc player type	DVD player