22
VQT3Q59
Operations
Using this unit
Preparation
≥ Turn on the TV.
Press [Í] to turn on the system.
Press [TV] or [HDMI 1/2] to select
the input source. (> 6)
≥ If you have selected [HDMI 1/2], make sure to select the
TV’s input mode for this system and start the playback.
Press [i VOL j] to adjust the
volume of the speakers.
≥ Volume range: 1 to 100
§
Press [i SUBWOOFER j] to
adjust the subwoofer level
(bass sound).
≥ Subwoofer levels: 1 to 4
§
§ The audio format indicators blink from left to right
(i) or from right to left (s) while adjusting the
speaker volume or the subwoofer level.
The indicators will not blink when it has reached
the maximum or minimum.
∫ To mute the sound
Press [MUTE].
≥ To cancel, press the button again or adjust the
volume.
≥ Muting is canceled if this system is turned off.
≥ If there is sound coming out of the TV’s speakers, reduce the
volume of the TV to its minimum.
≥ The maximum volume of the TV and this system may be
different.
≥ If this system is turned off with the volume setting in the
greater half (above 50), this system will automatically lower
the volume to the middle (50) when the system is turned on.
(Refer to page 25 to turn this function off.)
≥ The volume may be displayed on the TV if the active
subwoofer is connected to a Panasonic TV capable of
displaying this system’s volume setting.
If the system does not operate as expected
such as sound defects, return the settings to
the factory preset and operate the system
again. (> 26)
Audio format indicator
The audio format indicators
blink simultaneously while
muting.
SC-HTB15PP_VQT3Q59_eng.book Page 22 Wednesday, June 8, 2011 3:33 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
