7
Before use
VQT4D53
1 Turn the system on or off (> 21)
2 Adjust the dialog effect level (> 22)
3 Select the TV as the source (> 21)
4 Select the BD/DVD as the source (> 21)
5 Adjust the output level of the active subwoofer
(bass sound) (> 21)
6 Adjust the volume of the speakers (> 21)
7 Mute the sound (> 21)
8 Select the AUX as the source (> 21)
Unit care
∫ Clean the system with a soft, dry cloth
≥When the system becomes very dirty, wring a cloth moistened in water tightly to wipe the dirt, and then
wipe it with a dry cloth.
≥When cleaning the system, use a fine cloth. Do not use tissues or other materials (towels, etc.) that can
fall apart. Small grains may get stuck inside the speaker cover.
≥Never use alcohol, paint thinner or benzine to clean the system.
≥Before using chemically-treated cloth, carefully read the instructions that came with the cloth.
Remote control
Remove the insulation sheet A before using.
∫ To replace a button-type battery
1 While pressing the stopper B, pull out the
battery holder.
2 Set the button-type battery with its (i) mark
facing upward and then put the battery holder
back in place.
≥ When replacing the battery, use:
CR2025 (Lithium battery)
≥ Keep the button-type battery out of reach of
children to prevent swallowing.
SC-HTB20P_VQT4D53_eng.book 7 ページ ２０１２年１月１６日 月曜日 午後８時３分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
