Panasonic SC-HTB520 Owner's Manual

24
Specifications

1 Specifications are subject to change without notice.
Mass and dimensions are approximate.
2 Total harmonic distortion is measured by a digital spectrum
analyzer.
GENERAL
Power consumption: This unit: 25 W
Active Subwoofer: 21 W
Digital transmitter: 1.2 W
Power consumption in standby mode:
This unit: Approx. 0.18 W
Active Subwoofer: Approx. 0.07 W
Power supply: AC 120 V, 60 Hz
Dimensions (WkHkD):
This unit
(Excluding projecting parts)
1018 mmk75 mmk44 mm
(39
11
/16qk2
15
/16qk1
23
/32q)
(With safety holder)
1018 mmk77 mmk52 mm
(39
11
/16qk3
1
/32qk2
1
/16q)
(With stands (Low))
1018 mmk95 mmk75 mm
(39
11
/16qk3
3
/4qk2
15
/16q)
(With stands (High))
1018 mmk105 mmk75 mm
(39
11
/16qk4
1
/8qk2
15
/16q)
Active Subwoofer
180 mmk408 mmk306 mm
(7
3
/32qk16
1
/16qk12
1
/16q)
Digital transmitter
43.5 mmk37.3 mmk8.2 mm
(1
23
/32qk1
15
/32qk
5
/16q)
Mass (Weight):
This unit
(Without accessories)
Approx. 2.5 kg (5.5 lbs)
(With safety holder)
Approx. 2.6 kg (5.7 lbs)
(With stands)
Approx. 2.6 kg (5.7 lbs)
Active Subwoofer
Approx. 5.2 kg (11.5 lbs)
Digital transmitter
Approx. 0.0095 kg (0.0209 lbs)
Operating temperature range:
0
o
C to r40
o
C (r32
o
F to r104
o
F)
Operating humidity range:
20 % to 80 % RH (no condensation)
SPEAKER SECTION
FRONT SPEAKERS (BUILT-IN)
Type: 2 way, 2 speaker system (Bass Reflex)
Woofer: 6.5 cm (2
1
/2q) Cone typek2
Tweeter: 2.5 cm (1q) Semi-dome typek2
ACTIVE SUBWOOFER
Type: 1 way, 1 speaker system (Bass Reflex)
Woofer: 16 cm (6
1
/2q) Cone type
Frequency range: 30 Hz to 180 Hz (s16 dB)
35 Hz to 160 Hz (s10 dB)
AMPLIFIER SECTION
RMS Output Power: Dolby Digital Mode
Front ch: 60 W per channel (4 ≠),
1kHz, 10% THD
Subwoofer ch: 120 W per channel (8 ≠),
100 Hz, 10 % THD
Total RMS Dolby Digital mode power: 240 W
FTC Output Power: Dolby Digital Mode
Front ch: 25 W per channel (4 ≠),
140Hzto20kHz,1%THD
Subwoofer ch: 37 W per channel (8 ≠),
40Hzto150Hz,1%THD
Total FTC Dolby Digital mode power: 87 W
WIRELESS SECTION
Wireless module
Frequency Range: 2.4 GHz to 2.4835 GHz
Number of channels: 3
TERMINAL SECTION
HDAVI Control
This unit supports “HDAVI Control 5” function.
HDMI AV input
Terminal: 19-pin type A connector
HDMI AV output
Terminal: 19-pin type A connector
Digital audio input (TV only)
Optical digital input: Optical terminal
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: LPCM, Dolby Digital,
DTS Digital Surround
IR Blaster
Terminal Type: 3.5 mm (
1
/8q)jack
SC-HTB520PP_RQTX1278-Y.book Page 24 Friday, February 11, 2011 11:25 AM

Panasonic SC-HTB520 Specifications

General

Audio decoders	Dolby Digital, DTS
RMS rated power	240 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Impedance	4 Ω
Woofer diameter	65 mm
Tweeter diameter	25 mm
Soundbar speaker RMS power	120 W
Woofer diameter (imperial)	2.5 \
Tweeter diameter (imperial)	1 \
Total Harmonic Distortion (THD)	10 %
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Receiver included	No
Product color	Black
Consumer Electronics Control (CEC)	VIERA Link
Apple docking compatibility	Not supported
Soundbar dimensions (WxDxH)	1018 x 44 x 75 mm
Subwoofer dimensions (WxDxH)	180 x 306 x 408 mm
Subwoofer driver diameter (imperial)	6.5 \
HDMI in	1
Connectivity technology	Wired
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.6 W
Power consumption (typical)	30 W

Weight and Dimensions

Soundbar weight	2500 g
Subwoofer weight	5200 g