Panasonic SC-HTB770 - Speaker Fall Prevention Measures; Horizontal Wall Mounting Safety; Horizontal Tabletop Safety

24
RQT9849
When attaching the speakers vertically
A Cord*
1,2
B Screw eye
C Wall
D Approx. 150 mm
*1
If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about
10 mm apart from the tip, at an angle of 45
o
(as illustrated above).
*2
When attaching the cord to the centre speaker, make sure that the cord does not touch the
speaker cable lead wire.
C
A
A
B
C
A
B
C
A
*
*
Wall mounting







*
*
On a table
SC-HTB770_RQT9849-B_mst.book 24 ページ ２０１３年２月２５日 月曜日 午前１１時５３分