Panasonic SC-HTB770 - System Connections; Connecting to the TV (HDMI)

26
RQT9849
You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to
this system.
Preparation
≥Connect the main unit to the TV (> 25).
A HDMI cable
Connection with other devices
When the device has an HDMI terminal
DIGITAL
AUDIO
IN
AV IN
BD/DVD
AUX1
(HDMI1)
(HDMI2)
AUX2
(HDMI3)
AV IN
BD/DVD
AUX1
(HDMI1)
(HDMI2)
AUX2
(HDMI3)
A
HDMI OUT
HDMI OUT
HDMI OUT
AC IN
e.g., Set top box
e.g., Blu-ray Disc player
e.g., Video game console
∫ HDMI standby pass-through
Even if the main unit is in standby mode, the audio and/or video signal from the device connected to the BD/DVD, AUX1 or
AUX2 terminal will be sent to the TV connected to the HDMI OUT terminal (the sound will not be output from this system).
When devices are connected to all BD/DVD, AUX1 and AUX2 terminals, audio and/or video signal of the device whose input
is lastly selected is output.
∫ 3D compatibility
Compatible with FULL HD 3D TV and Blu-ray Disc player.
≥ The main unit can pass-through the 3D video signal from a 3D compatible Blu-ray Disc player to a FULL HD 3D TV.
When the device has an optical digital audio output terminal
B Refer to the operating instructions of the respective devices for the optimal connection.
C Optical digital audio cable
DIGITAL
AUDIO
IN
AUX3
(OPT2)
DIGITAL
AUDIO
IN
AUX3
(OPT2)
OPTICAL
OUT
B
C
AC IN
e.g., Set top box
TV
SC-HTB770_RQT9849-B_mst.book 26 ページ ２０１３年２月２５日 月曜日 午前１１時５３分