Panasonic SC-HTB880 User Manual

Getting started
RQT9904
11

≥ Refer to the operating instructions of the connected HDMI compatible device for the necessary setting, to output the video and
audio signals.
With the IR Blaster connection, it is possible to send the IR signal received by this system’s remote
control signal sensor to the TV’s sensor.
Use the TV’s remote control within the operation range of this system’s remote control signal sensor.
≥For the operation range, refer to page 8.
Connect the jack plug to the main unit’s Ir SYSTEM terminal.
Place the infrared emitter in sight of the TV’s remote control signal
sensor.
≥ For the location of the TV’s remote control signal sensor, refer to the operating instructions for the TV.
Aim the TV’s remote control at this system’s remote control sensor and
operate the TV.
≥ For the location of this system’s remote control signal sensor, refer to page 8.
≥ Make sure to clean the surface, where the adhesive tape is to be attached.
≥ If you peel off the adhesive tape, the surface may become damaged and exposed adhesive may remain. Once you have
confirmed the TV is operating correctly, secure it by attaching the adhesive tape.
∫ HDMI standby pass-through
Even if the main unit is in standby mode, the audio and/or video signal from the device connected to the HDMI AV IN1 or
HDMI AV IN2 terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this
system). When devices are connected to all HDMI AV IN1 and HDMI AV IN2 terminals, audio and/or video signal of the
device whose input is lastly selected is output.
∫ 3D compatibility
Compatible with FULL HD 3D TV and Blu-ray Disc player.
≥ The main unit can pass-through the 3D video signal from a 3D compatible Blu-ray Disc player to a FULL HD 3D TV.
∫ 4K/60p compatibility
Compatible with 4K Ultra HD TV and Blu-ray Disc player.
≥ This system can pass-through the 4K content of a 4K compatible equipment to a 4K Ultra HD TV.
≥ When connecting to 4K compatible equipment and 4K Ultra HD TV, use High Speed HDMI cables which support 18 Gbps
bandwidth.
Using the IR Blaster
Ir SYSTEM
Infrared emitter
SC-HTB880EB_RQT9904-B.book 11 ページ ２０１４年３月３日 月曜日 午前１０時２９分

Panasonic SC-HTB880 Specifications

General

RMS Power	500 watts
Outputs	hdmi
USB Ports	1
Bluetooth	yes
Wireless Subwoofer Connectivity	yes
Optical Audio Inputs	1
Remote Control	no

Weight and Dimensions

Depth	12.3 inches
Width	14.4 inches
Net Weight	24.55 pounds