Panasonic SC-HTB880 User Manual

Getting started
Precautions
RQT9904
19
Step 3 Wireless connections
Preparation
≥ Turn on the main unit.
Press [BÍ CI].
Active subwoofer on/off button [B Í C I]
Use this button to turn the active subwoofer on
and off.
C I:
The active subwoofer is on.
B Í:
The active subwoofer is off.
The active subwoofer will still consume a small
amount of power even when it is turned off (
B , Í ).
Check that the wireless link is
activated.
WIRELESS LINK indicator
Lights red:
The wireless link is not activated.
Lights green:
The wireless link is activated.
Blinks green:
The active subwoofer is trying to activate the
wireless link with the main unit.

The wireless link will be activated when the main unit and the
active subwoofer are both turned on.
By using the Bluetooth
®
connection, you can listen
to the sound from the Bluetooth
®
audio device
from this system wirelessly.
≥ Refer to the operating instructions of the Bluetooth
®
device for
further instruction on how to connect a Bluetooth
®
device.
Preparation
≥ Turn on the Bluetooth
®
feature of the device and
place the device near the main unit.
Press [ ] to select “BLUETOOTH”.
≥ If “PAIRING” is indicated on the display, go to step 3.
Press and hold [ ] until “PAIRING”
is indicated on the display.
Select “SC-HTB880” from the
Bluetooth
®
device’s Bluetooth
®
menu.
≥ If prompted for the passkey on the Bluetooth
®
device, enter “0000”.
≥ Once the Bluetooth
®
device is connected, the name of the
connected device will be indicated on the display for a few seconds.

≥ You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Press [ ] to select Bluetooth
®
mode.
≥ If “BLUETOOTH READY” is indicated on the display, go to step 3.
Press and hold [ ] until
“BLUETOOTH READY” is indicated
on the display.
Select “SC-HTB880” from the
Bluetooth
®
device’s Bluetooth
®
menu.
∫ Disconnecting a Bluetooth
®
device
Press and hold [ ] until the “BLUETOOTH
READY” is indicated on the display.

≥ When “BLUETOOTH” is selected as the source, this
system will automatically try and connect to the last
connected Bluetooth
®
device.
≥
This system can only be connected to one device at a time.
≥ To change the sound quality, refer to page 24 “LINK MODE”.
Active subwoofer
wireless connection
Bluetooth
®
connection
Bluetooth
®
pairing
Connecting a paired
Bluetooth
®
device
SC-HTB880EB_RQT9904-B.book 19 ページ ２０１４年３月３日 月曜日 午前１０時２９分

Panasonic SC-HTB880 Specifications

General

RMS Power	500 watts
Outputs	hdmi
USB Ports	1
Bluetooth	yes
Wireless Subwoofer Connectivity	yes
Optical Audio Inputs	1
Remote Control	no

Weight and Dimensions

Depth	12.3 inches
Width	14.4 inches
Net Weight	24.55 pounds