Panasonic SC-HTB880 User Manual

Getting started
Operations
RQT9904
21
Operations
Using this system
Preparation
≥ Turn on the active subwoofer.
≥ Turn on the TV and/or connected device.
Press [Í] to turn on the main unit.
Select the source.
≥ This remote control cannot be used to control the
operations of the connected devices.
∫ When “BLUETOOTH” is selected as
the source
On the Bluetooth
®
device:
Select this system as the output source of the
connected Bluetooth
®
device and start the
playback.
∫ When “BD/DVD” or “AUX” is selected
as the source
On the TV and the connected device:
Select the TV’s input for this system and start the
playback on the connected device.
∫ To adjust the volume of this system
Press [i VOL j].
≥ Volume range: 0 to 100
∫ To mute the sound
Press [MUTE].
≥ While muting, “MUTE” is indicated on the display.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is cancelled if the main unit is turned off.

≥ If there is sound coming out of the TV’s speakers, reduce
the volume of the TV to its minimum.
Press To select
[INPUT]
“ TV ” -# “ BD/DVD ” -# “AUX”
^-------“BLUETOOTH”(--}
[] “BLUETOOTH”
SOUND
INPUT
SETUP


OK
If this system does not operate as
expected or sound is unusual, returning
the settings to the factory preset may
solve the problem. (> 26)
SC-HTB880EB_RQT9904-B.book 21 ページ ２０１４年３月３日 月曜日 午前１０時２９分

Panasonic SC-HTB880 Specifications

General

RMS Power	500 watts
Outputs	hdmi
USB Ports	1
Bluetooth	yes
Wireless Subwoofer Connectivity	yes
Optical Audio Inputs	1
Remote Control	no

Weight and Dimensions

Depth	12.3 inches
Width	14.4 inches
Net Weight	24.55 pounds