Panasonic SC-PM4 - Discs; Basic Disc Playback; Advanced Disc Playback; Disc Play Modes

RQTV0211
6
Discs
Basic play
Basic play
CD
MP3
1
Press [y] to turn the unit on.
2
Press [CD OPEN/CLOSE 0] to open the
disc lid and then load the disc. Close
the lid.
Label must
face upward
3
Press [CD 6] to start play.
4
Adjust the volume.
To
Action
stop the disc
Press [ 7 ].
pause play
Press [CD 6]. Press again to resume play.
skip tracks
Press [ /4] or [ /¢].
search through
tracks
CD
Press and hold [ /4] or [ /¢] during
play or pause.
skip album
MP3
Press [ALBUM or ] in the play mode.
Press [ALBUM
or ] once and then the
numeric buttons in the stop mode.
Play Mode function
Play Mode function
CD
MP3
1
Press [CD 6].
2
Press [PLAY MODE] to select the desired mode.
Mode
To play
1-TRACK
1TR
one selected track on the disc.
Press the numeric buttons to select the track.
1-ALBUM
1ALBUM
MP3
one selected album on the disc.
Press [ALBUM
or ] to select the album.
RANDOM
RND
a disc randomly.
1-ALBUM
RANDOM
1ALBUM RND
MP3
all tracks in one selected album randomly.
Press [ALBUM
or ] to select the album.
Note
• During RANDOM or 1-ALBUM RANDOM play, you cannot skip to
tracks that have been played.
CD
• During RANDOM play, you can search backward or forward only
within the current track.
Display function
Display function
This function allows you to display the information of the
current track.
Press [DISPLAY] repeatedly during play or pause mode.
CD
Elapsed play time Remaining play time
MP3
Elapsed time Album name Track name
ID3 (Artist)
ID3 (Track) ID3 (Album)
Note
• Maximum number of displayable characters: approximately 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about
the track.
Advanced play
Advanced play
Repeat play
Repeat play
You can repeat program play or other selected play mode.
CD
MP3
Press [REPEAT] before or during play.
“REPEAT ON” and “
” are displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “
” is cleared.
Program play
Program play
This function allows you to program up to 24 tracks.
CD
1
Press [CD 6] and then [ 7 ].
2
Press [PROGRAM].
3
Press the numeric buttons to select your desired
track.
Repeat this step to program other tracks.
4
Press [CD 6] to start play.
MP3
1
Press [CD 6] and then [ 7 ].
2
Press [PROGRAM].
3
Press [ALBUM or ] to select your desired
album.
4
Press [ /¢] once and then the numeric buttons to
select your desired track.
5
Press [ENTER].
Repeat steps 3 to 5 to program other tracks.
6
Press [CD 6] to start play.
To
Action
cancel program mode Press [PROGRAM] in the stop mode.
replay the program Press [PROGRAM] then [CD 6].
check program
contents
Press
[ /4] or [ /¢] when “PGM”
is displayed in the stop mode.To check
while programming, press [PROGRAM]
twice after “PGM” appears, then press
[ /4] or [ /¢].
add to the program
CD
Repeat step 3 in the stop mode.
MP3
Repeat steps 3 to 5 in the stop mode.
clear the last track Press [DEL] in the stop mode.
clear all programmed
tracks
Press [CLEAR] in the stop mode.
“CLR ALL” is displayed.
Note
• When you try to program more than 24 tracks, “PGM FULL”
appears.
• The program memory is cleared when you open the disc lid.
CD
• During program play, you can search backward or forward only
within the current track.
PM4_EB_En.indd 6PM4_EB_En.indd 6 1/31/07 2:41:45 PM1/31/07 2:41:45 PM