ENGLISH
RQTX0190
12
ALL BAND III Frequency
Frequency
block
Frequency
(MHz)
Frequency
block
Frequency
(MHz)
5A 174.928 10N 210.096
5B 176.640 10B 211.648
5C 178.352 10C 213.360
5D 180.064 10D 215.072
6A 181.936 11A 216.928
6B 183.648 11N 217.088
6C 185.360 11B 218.640
6D 187.072 11C 220.352
7A 188.928 11D 222.064
7B 190.640 12A 223.936
7C 192.352 12N 224.096
7D 194.064 12B 225.648
8A 195.936 12C 227.360
8B 197.648 12D 229.072
8C 199.360 13A 230.784
8D 201.072 13B 232.496
9A 202.928 13C 234.208
9B 204.640 13D 235.776
9C 206.352 13E 237.488
9D 208.064 13F 239.200
10A 209.936
Shaded areas are frequencies used currently as of
February 2009 in the “United Kingdom”.
DAB (continued)
Only the frequencies currently used in the UK as of
February 2009 on BAND III are Auto scanned (“United
Kingdom”, factory setting).
Select “ALL BAND III” when you want to store stations
on other frequencies to memory.
1 Press [DAB MENU] to enter menu mode.
2 Within 10 seconds, press [e,r] to select
“DAB SCAN MODE” and then press [OK].
3 Within 10 seconds, press [e,r] to select
“UNITED KINGDOM” or “ALL BAND III” and then
press [OK].
Auto scan begins automatically after the change has
been made.
To exit
Press [DAB MENU] again.
When the “DAB SCAN MODE” is changed, the DAB
preset channels are erased and if the DAB play timer
has been set the timer switches to off.
Note
Changing the Auto scan
frequency range
SC-PM42DBEB.indb 12 1/6/2010 10:14:40 AM
To Next Page
Loading...
Need help?
General
