- Making the connections
Connect the AC mains lead only after all other connections have been made.
Getting started
3
Connect the speaker cables.
Red (ª)
Black (·)
Black (·)
Incorrect connection can damage the unit.
Red (ª)
1
Connect the DAB “T” antenna
The cross bar of the T should be kept fi rmly stretched.
Find a position with good reception.
There is a function on the unit to check signal quality.
For best reception
A DAB outdoor antenna is recommended (➡ page 6).
Be sure to fully
tighten the screw.
Adhesive tape
PM45DB_EB_EN.indd 4PM45DB_EB_EN.indd 4 3/6/07 5:50:44 PM3/6/07 5:50:44 PM