Discs — Basic play
Discs — Basic play
• If the disc contains both audio data (WMA and MP3) and JPEG, select “All” to play both, “Audio”
to play WMA/MP3, or “Picture” to play JPEG while the menu is displayed (except on ) .
You can also access the menu by pressing [TOP MENU].
DVD/CD q
DISC
CHECK
;, CHANGE
STOP g
VOLUME, UP, DOWN
;, DISC OPEN/CLOSE
Disc trays
1–5
1
Open the disc tray.
• T h e u n i t t u r n s o n
automatically and a tray
opens.
2
Place disc.
• Load double-sided discs so the
label for the side you want to
play is facing up. (
➡ Tray/disc
handling procedure, page 5)
• Remove TYPE 2 and 4 discs
from their cartridges before use.
Read the instructions for the
disc carefully.
3
Close the disc tray.
4
Start play.
• It may take so me time
for play to start but this is
normal.
Volume
adjustment
Stop
The stopped play position is memorized
when “RESUME” is displayed.
• Press [DVD/CD
q] to resume play.
• Press [
g, STOP] to clear the position.
Pause
• Press [DVD/CD q] to restart play.
Skip
Label must face
upward.
Disc tray
Tray number
Search
(during play)
• Up to 5 steps.
• Press [DVD/CD q] to restart play.
Slow-
motion
• Up to 5 steps.
• Press [DVD/CD q] to restart play.
• Motion picture parts only.
• Forward direction only.
Frame-by-
frame
(during pause)
• Motion picture parts only.
• Forward direction only.
• P r e s s i n g [
h , P A U S E ] a l s o
activates forward direction.
• Press [DVD/CD q] to restart play.
To Next Page
Loading...
