Panasonic SD-251 - Completion and Removal

C
bes
;
CE
Steps
The beeper will sound eight times and
the indicating light will flash when the
bread is baked, or the dough is
completed.
Promptly open the lid and remove the
bread pan using oven gloves.
Press Start/Stop.
The unit keeps the bread warm for 1
hour or until Start/Stop is pressed to
prevent condensation of the steam.
For DOUGH options, follow each recipe
directions for further steps instructed in
the cook book.
Turn the pan upside down.
Shake the pan several times to release
the bread.
If the kneading blade comes out with
the bread, use a heat-resistant plastic
utensil to remove it.
For DOUGH options, when baking is
completed, remove from the oven,
using oven gloves.
Place the bread on a wire rack to cool
and allow the steam to escape.
Unplug after use.
—Allow at least 1 hour for the unit to cool down before the next use.
2434
Notes
The bread pan will be very
hot.
Do not place it on any plastic
surfaces. Handle carefully.
If the bread is left in the unit,
further browning of crust colour
may occur.
The bread and the kneading
blade will be very hot.
A metal utensil may scratch
the finish of the kneading
blade.
See “Slicing and storing the
bread” on P. 17.