Panasonic SD-YD250 - Page 13

No.
Parts Name
1 Power cord
2 Body
2.4. Power cord
1. Disconnect the power cord connectors.
2. Push the cord bushing A and push out B. (Fig.12)
Fig.12
No.
Parts Name
1 Angle
2 Cord bushing
3 Power cord
2.5. Temperature sensor (& fuse) assembly
1. Remove the sensor mounting screw. (Fig.13)
2. Pull out and disconnect the CN1, CN2, CN4, heater terminal
connector (black lead wires) and power cord connector.
13