Panasonic SD-YD250 - Page 12

No.
Parts Name
1 Screw
2. Turn the body upside down and remove the four mounting screws
in order to remove the feet. (Fig.9)
3. Remove the four bottom plate mounting screws in order to
remove the Bottom plate. (Fig.9)
Fig.9
No.
Parts Name
1 Screw
2 Washer
3 Rubber foot
4 Bottom plate
5 Screw (Wide pitch thread)
6 Screw (Normal thread)
4. Pull the body upward to remove the heater case. (Fig.10)
Fig.10
12