Panasonic SD-YD250 - 2.10. Bread Pan & Mounting Shaft Unit Removal

No.
Parts Name/Mark
1 Set Mark [Circle]
2 Set Mark [Square]
3 Screw
4 Heater case
5 Heater case base
2.12. Bread pan, Mounting shaft unit
1. Turn the bread pan upside down, remove the three screws and
remove the mounting shaft unit. (Fig.20)
Fig.20
No.
Parts Name
1 Bread pan
2 (+) Screw driver
3 Mounting shaft unit
2. Remove the rubber seal.
18