Panasonic SD-YD250 - 2.2. PCB (B) Removal

No.
Parts Name
1
Screw
2 Solenoid holder plate
3
Solenoid
4
Spring A
2.2. Remove of PCB (B)
Note:
Please detach Control panel and Top lid to the start, and remove the connector connection of
lead wires.
Before turning the body upside down, remove the kneading blade and bread pan.
1. Remove the six screws which secure the heater case from the
sides. (Fig.8)
Fig.8
No.
Parts Name
1 Screw
9