No.
Parts Name
1
Positive lock connector
2 Extruded lever
4. Remove the PCB cover assembly by lifting up from the right side.
5. To separate the PCB from the cover assembly, bend back the four
holding tabs while lifting out the PCB. (Fig.6)
Fig.6
No.
Parts Name
1 PCB Cover
2 PCB-(A)
3 Tabs
4 Flat cable
6. Remove the screw of Solenoid holder plate, and Solenoid and
Spring A are detached. (Fig.7)
Fig.7
8
To Next Page
Loading...
