58
VQT3E89
If auto focusing is difficult due to the conditions, then use manual focus.
¬ Change the mode to .
≥ Press the iA/MANUAL button to switch to manual mode (l 55)
1 (When MF assist function is used)
Select the menu. (l 23)
2 Use the joystick to select [MF]
3 Adjust the focus by selecting
or with the joystick.
A Part displayed in blue
The in-focus area is displayed in blue. The
normal screen returns approximately
2 seconds after you finish bringing the
subject into focus.
≥ When [MF ASSIST] is set to [OFF], the
blue area is not displayed.
≥ To return to auto focus, either switch to
[AF] as in step 2, or repress the iA/
MANUAL button.
≥ The blue display does not appear in the
motion picture that is actually recorded.
Recording with manual focus
[RECORD SETUP] # [MF ASSIST] #
[ON]
:To focus on a close subject
:To focus on a faraway subject
5/55/5
NEXTNEXT5/5
NEXT
MNL
SDRS71&H101GN-VQT3E89_mst.book 58 ページ ２０１０年１２月２日 木曜日 午後３時３５分
To Next Page
Loading...
