95
VQT3E89
When the unit is connected to a PC, it is recognised as an external drive.
≥ Removable disk (Example: ) is displayed in [Computer].
Example folder structure of an SD card:
Example folder structure of HDD:
The following data will be recorded.
1 Up to 999 still pictures in JPEG
format (S1000001.JPG etc.)
2 JPEG format still pictures created
from the motion picture
3 The DPOF setting files
4 SD-Video standard control data
5 SD-Video standard video data
(maximum of 99 files)
∫ Copying your still pictures to
your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be
copied to the PC with Explorer or other
programmes.
1 Double click the folder that contains
the still pictures. ([DCIM] #
[100CDPFQ] etc.)
2 Drag and drop the still pictures onto
the destination folder (on the PC’s
HDD).
≥ Do not delete the SD card’s folders. Doing
so may make the SD card unusable in this
unit.
≥ When data not supported by this unit has
been recorded on a PC, it will not be
recognised by this unit.
≥ Always use this unit to format SD cards.
About the PC display
We recommend using VideoCam Suite 3.5
to copy or write back motion picture data.
Using Windows Explorer or other
programmes on the PC to copy, move or
rename files and folders recorded with
this unit will result in them being unusable
with VideoCam Suite 3.5.
It is impossible to write data to the HDD
on this unit from a PC.
DCIM
CAM_SD
100CDPFQ
MGR_INFO
PRG001
MISC
SD_VIDEO
101CDPFS
CAM_HDD
DCIM
100CDPFQ
MGR_INFO
PRG001
SD_VIDEO
101CDPFS
SDRS71&H101GN-VQT3E89_mst.book 95 ページ ２０１０年１２月２日 木曜日 午後３時３５分
To Next Page
Loading...
