To Next PageTo Next PageHow to fix Panasonic Monitor remote control not working?
If the remote control for your Panasonic Monitor isn't working, check whether the remote control sensor is exposed to outdoor light or strong fluorescent light. Also, make sure there are no obstacles between the remote control sensor and the remote control.
What to do if my Panasonic SF2H Monitor has no picture?
If your Panasonic Monitor displays no picture, ensure it is plugged into the AC outlet and switched on. Check the picture and brightness/volume settings by pressing the or the .
How to fix image retention on Panasonic SF2H Monitor?
If image retention appears on your Panasonic Monitor, display a general moving picture for a while to make it disappear.
Why are there spots on my Panasonic SF2H screen?
The red, blue, green, and black spots that may appear on your Panasonic Monitor screen are a characteristic of liquid crystal panels and are not a problem.
Why do the edges of the images flicker on my Panasonic SF2H Monitor?
The flickering edges of images on your Panasonic Monitor are normal and not indicative of malfunctioning.
How to adjust screen position on Panasonic SF2H Monitor?
If the top or bottom of the picture is cut off on your Panasonic Monitor screen, adjust the picture position in the [Position] menu.
Why does my Panasonic SF2H Monitor screen darken slightly?
The slight darkening of the Panasonic Monitor screen when bright pictures with minimal movements are shown is normal. This is done to reduce image retention and extend the screen's service life and is not indicative of malfunctioning.
Why won't a file play on Panasonic Monitor's 'Memory viewer'?
If a file plays back with “USB media player” but not with “Memory viewer” on your Panasonic Monitor, check the playback file specifications of both “USB media player” and “Memory viewer.”
Why can't my Panasonic Monitor receive the LightID?
If the LightID cannot be received on your Panasonic Monitor, ensure that [LightID] is not set to [Off] and that intense light is not hitting the LCD panel.
Why is there no picture or sound from Panasonic SF2H Monitor's [DIGITAL LINK] terminal?
If there's no picture or sound output from the [DIGITAL LINK] terminal on your Panasonic Monitor, check the connection between the video (output) equipment and the twisted pair cable transmitter. Also, ensure that [Network settings] - [DIGITAL LINK mode] is not set to [Ethernet].
General| Series | SF2H |
|---|---|
| Operating Temperature | -10 °C to +55 °C |
| Type | Light Curtain |
| Beam Pitch | 20 mm / 40 mm |
| Operating Voltage | 24 V DC |
| Output Type | PNP / NPN |
| Safety Category | Category 4 |
