Watching TV
3D
3D settings
5 IMENU]
> > :_,_,_
Auto detect 3D
(Off/Auto l/Auto 2)
Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note: Choose 3D mode manually when auto detection is not available.
3D signal notification
(Off/On)
On: Displays a message according to the signal received by the
3D refresh rate
(96Hz*/100Hz/120Hz) *24Hz only
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz: If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
120Hz: If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
• Gray-out in 2D mode
2D --_ 3D depth
(Minimum/Medium/Maximum)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
3D adjustment
(Off/On)
Adjust the left eye versus right eye depth effect of the image. Set to On to
adjust (-3 to +3).
• Gray-out in 2D mode
53 (0600205)
To Next Page
Loading...
