Home network "DLNA"
Network settings
Network connection/Network status
Network connection/Network status
Select using A/V and press
Select Quick setup to launch Network connection setup wizard.
Follow the directions on the screen to complete the network connection.
° Manual settings are also available.
Select Custom and select your connection type.
Displays setting menu according to selected connection type.
Set the desired menu and complete the network connection.
Displays
Select Try again and press OK to start connection test.
Success ,_ Completion message is displayed.
Error _ Select Status details/Help and press OK to display solution
of the connection error.
Follow the directions on the screen to complete the network settings.
° You can also display from menu.
(_ _i > _ _:,;)
Exit the screen
Select Done and press OK to exit from this screen.
69 (0200202)
To Next Page
Loading...
