11
Charging the Battery
Be sure to turn the power switch on the camera off
when charging the battery.
1 Slide and open the Card/Battery Door.
2 Insert the battery all the way.
≥Confirm the direction of the battery.
≥Be sure to insert the battery until fixed with the
Battery Lock.
3 Close and lock the Card/Battery Door
while sliding it.
4 Place the SD Video Camera on the USB
Cradle.
5 Connect the DC Input Lead to the [DC IN
4.8V] socket on the USB Cradle.
6 Connect the AC Adaptor to AC Main
socket.
≥Power/Card Access Lamp 1 flashes, and
Charging starts.
7 Wait until Power/Card Access Lamp 1
goes off.
≥When recharging is completed, Power/Card
Access Lamp goes off.
≥Under normal operation the charging light stays on
during charging. If it blinks a charging problem may
be occurring. Please see page 56 for more details.
ª Removing the Battery
1 Slide and open the Card/Battery Door.
2 Release the Battery Lock A and incline
this unit to remove the Battery.
≥When you cannot remove the battery, pull out the
projection part B to remove it.
3 Close and lock the Card/Battery Door
while sliding it.
AB
DC IN 4.8V
1
5
6
2
1
2
3
AV50PP_ENG.book 11 ページ ２００３年１１月２６日 水曜日 午後３時１７分
To Next Page
Loading...
