Panasonic SV-AV50 - Using Auto Recording Function

41
Using Auto Recording
Function
When the input signal is detected, the recording starts
automatically.
1 Connect the SD Video Camera with the
external device. (l 40)
≥Always use the AC adaptor. This function does
not work with the battery alone.
2 Set up the external device such as timer
setting.
3 Confirm that the image or sound signal is
not output.
4 Set the Record/Play mode Switch to [ ]
and set the operation mode to [MPEG4].
5 Press the [MENU] Button and then, select
[Auto recording setup] and press the Jog
Ball.
6 Set [REC Timer] to desired time.
≥The setting time is the period between starting
recording and finishing recording.
7 Select [Auto record standby] and press
the Jog Ball.
≥A verification message appears.
8 Select [Yes] and press the Jog Ball.
≥Transits to the standby mode and the power is
automatically shut down.
≥When the input signal is detected, the recording
starts.
≥Pressing the Recording Start/Stop button during
recording will stop the recording.
MENU
MENU
Ô
×
':+6
':+6
4'%/'07
4'%/'07
&KURNC[UGVWR
&KURNC[UGVWR
5GVWR
5GVWR
ų
#WVQTGEQTFKPIUGVWR
#WVQTGEQTFKPIUGVWR
5WRGTHKPG
5WRGTHKPG
/2')OQFG
/2')OQFG
5
#7614'%14&+0)5'672
#7614'%14&+0)5'672
OKP
OKP
4'%6KOGT
4'%6KOGT
#WVQTGEQTFUVCPFD[
#WVQTGEQTFUVCPFD[
ų
4
6
Ô
×
8
#7614'%14&+0)5'672
#7614'%14&+0)5'672
OKP
OKP
4'%6KOGT
4'%6KOGT
#WVQTGEQTFUVCPFD[
#WVQTGEQTFUVCPFD[
ų
7
MODE
MODE
Ô
×
AV50PP_ENG.book 41 ページ ２００３年１１月２６日 水曜日 午後３時１７分