Panasonic TC-21FJ30LA - DAC Control for GP3 Chassis Functions and Adjustments; How to Enter Service Mode; Exit Service Mode; CHK1 Mode Options

- 9 -
TC-21FJ30LA
CHK1 MODE - OPTIONS
On CHK1 mode it is possible to adjust the items of the table shown here.
Note:
To select an item, type “4” to move forward and “3” to move back.
After having selected the desired option, adjust it by pressing the “VOL(
_
)” or “VOL(+)”
keys. The OSD color will change for red.
Press “0” To memorize the adjustment.
OPTION4
OPTION6
å
å
DIGITO LSB
DIGITO LSB
“4”
“4”
“3”
OPTION1 OPTION1 OPTION2 OPTION2
ááá
å ááá
DIGITO MSB DIGITO LSB DIGITO MSB DIGITO LSB
“4”
“3”
“3”
“4”
“3”
“3”
“4”
“3”
“3”
“4”
“3”
“3”
OPTION3
OPTION5
OPTION7
OPTION3
OPTION5
OPTION8
OPTION4
OPTION6
OPTION1
á
á
á
á
á
á
á
á
å
á
á
á
á
á
á
á
á
DIGITO MSB
DIGITO MSB
DIGITO MSB
DIGITO LSB
DIGITO LSB
DIGITO LSB
DIGITO MSB
DIGITO MSB
DIGITO MSB
“4”
“4”
“4”
“3”
“3”
“4”
“4”
“4”
“3”
“3”
“4”
“4”
“4”
“3”
“3”
CHK1 MODE TABLE
Standard values
C4
00
00
33
03
20
00
09
OPTION1
OPTION2
OPTION3
OPTION4
OPTION5
OPTION6
OPTION7
OPTION8
THE DAC CONTROL FOR GP3 CHASSIS FUNCTIONS AND ADJUSTMENTS
HOW TO ENTER IN THE SERVICE MODE:
1- Set the “OFF TIMER” to 30 minutes.
2- Press simultaneously “RECALL” key on the remote control and VOL(-) button on the unit.
After a couple of seconds, the expression “CHK” should appear on the right superior side of the screen. (To change
the memory data, press MUTE and VOLUME(
_
) simultaneously while the OSD is still on CHK1 mode. Key “4” moves
forward in the memory, and key “3” moves back in the memory
Note: To alter from CHK1 mode to CHK2, CHK3 or CHK4 modes, press key “2” to move forward and the key “1” to
move back, as illustrated below.
TO EXIT SERVICE MODE AND RETURN TO NORMAL MODE:
Press the “NORMAL” key on the remote control unit or turn off the TV.
CHK1 - OPTIONS
On CHK1 mode, it is possible to adjust the options below:
Turn Off
NORMAL MODE
OPTION CODE
SETTING
“2”
“
1”
VCJ
ADJUSTMENT
CHK1
SERVICE MODE
“2”“2”
“
1”“1”
PINCUSHION
ADJUSTMENT
WHITE BALANCE
ADJUSTMENT
CHK2 CHK3
“2”
“
1”
STEREO
ADJUSTMENT
CHK4 CHK5
Note:
To select an option, type “4” to move forward
and “3” to move back.
After having selected the desired option, adjust
it by pressing the “VOL(
_
)” or “VOL(+)” keys.
Press “0” to memorize the adjustment.