Panasonic TC-21FX30LA - Service Operations and Procedures; Service Hints; Factory Mode Adjustment

- 10 -
TC-21FX30LA/LP / TC-29FX30LA/LP
FACTORY MODE ADJUSTMENT (TC-21FX30LA/LP / TC-29FX30LA/LP)
HOW TO ENTER IN THE GP41 SERVICE MODE:
à
TO ENTER IN THE SERVICE MODE 1:
1. Adjust “OFF TIMER” to 30 minutes.
Press simultaneously “VOLUME (–)” on the front panel and “RECALL” on the remote control to enter “SERVICE MODE-1”.
à
TO ENTER IN THE SERVICE MODE 2:
1. Enter in the “SERVICE MODE 1”.
2. Press the “1” channel key to enter “SERVICE MODE 2”.
à
TO ENTER IN THE SERVICE MODE 3:
1. Enter in the “SERVICE MODE 2”.
2. Press the “1” channel key to enter “SERVICE MODE 3”.
Main Board
Pull out this way
Fig. 2
Note: Always, finishing the adjustments, press the “NORMAL” key or the “POWER” key in the remote control to exit the
service mode and return to TV normal way.
SERVICE HINTS
SERVICE POSITION FOR E-BOARD
1. Remove the back cover.
2. Stand the TV set as shown in Fig. 2.
3. Remove the A-Board from the TV set by pulling the main board out as shown in Figure 2.