TC-L32C3
12
6.2. Power LED Blinking timing chart
1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the
identified by the number of blinks of the Power LED on the front panel of the unit.
6.3. No Power
First check point
There are following 2 states of No Power indication by power LED.
1. No lit
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
BlinkingTimes Contents Check point
1 BACK LIGHT SOS
LCD Panel
P-Board
2 SUB 1.8V SOS A-Board
3 SUB 1.2V SOS A-Board
4 POWER SOS
A-Board
P-Board
10 SUB 3.3V_SENSE A-Board
11 TC_DCDC_SOS A-Board
12 SOUND_SOS
A-Board
Speaker
To Next Page
Loading...
