Panasonic TC-P50ST50 - Troubleshooting 6 Blinks Failure

Troubleshooting 6 Blinks Failure
List of boards likely to cause this
symptom.
Blink
Code
No.1 No.2 No.3 No.4
6 Blinks SC A
Yes
Verify that all the cables on the SC board are properly seated. Also check the ribbon cables and connectors on the A
and C boards. Unplug the TV and disconnect connector SC20 on the SC board. Plug in the TV and turn it on
No
Did the
number of
blinks change
to 8 blinks?
Start Here
Replace the A
board
Replace the SC
board
6 Blinks
Slide 17