Panasonic TH-103VX200W - Removal of HX-Board

25
TH-103VX200W
2. Remove 15 screws ( ).
3. Remove 4 screws ( ) and then remove the Side Angle
(L).
9.3.2. Removal of Side Angle (R)
1. Disconnect the connectors (DS22, P34).
2. Remove 2 screws ( ).
3. Remove 2 screws ( ) and then slide the Side Power Unit
upward.
4. Remove the Side Power Unit.
5. Remove 4 screws (B) of the Plate.
6. Remove 15 screws ( ).
7. Remove 4 screws ( ) and then remove the Side Angle
(R).
9.4. Removal of HX-Board
1. Disconnect the connectors (A14).