Panasonic TH-103VX200W - Removal of C2-Board (Upper); Removal of C3-Board (Upper)

36
TH-103VX200W
9.23. Removal of C2-Board (upper)
1. Remove the Reinforcement Angle (upper_right).
(Refer to Removal of SU-Board)
2. Remove the flexible cables from the connectors (C20,
C21).
3. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA3, CA4, CA5).
4. Remove 6 screws ( ) and then remove C2-Board
(upper).
9.24. Removal of C3-Board (upper)
1. Remove the Eye Bolt (center).
2. Remove 3 screws ( ).
3. Remove 2 screws ( ) and then remove the Rear Cover
Angle (upper_center).
4. Remove the Fan Block (5).
(Refer to Removal of Fan)
5. Remove 2 screws ( ).
6. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (upper_center).
7. Remove the flexible cables from the connectors (C30,
C31, C32).
8. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA6, CA7, CA8).
9. Remove 6 screws ( ) and then remove C3-Board
(upper).