Power switch
Remote Control Sensor Power Indicator
13
Power On / Off
Press the button on the remote control to turn the Display off.
Power Indicator: Red (standby)
Press the button on the remote control to turn the Display on.
Power Indicator: Green
Turn the power to the Display off by pressing the switch on the unit,
when the Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator
turns orange in the power off state.
Connecting the plug to the Wall Outlet
Notes:
• Main plug types vary between countries. The
power plug shown at right may, therefore, not be
the type fi tted to your set.
• When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the socket
outlet fi rst.
Press the Power switch on the Display to turn the
set on: Power-On.
Power Indicator: Green
Connecting the AC cord plug to the Display.
To Next Page
Loading...
