EasyManua.ls Logo

Panasonic TH-42LFE6E - Specifi Cations

Panasonic TH-42LFE6E
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5555
TH-42LFE6E TH-50LFE6E
Power Source 220-240 V AC, 50/60 Hz
Power Consumption
Rated Power
Consumption
65 W 90 W
Stand-by condition 0.5 W 0.5 W
Power off condition 0.5 W 0.5 W
Sound
Speakers 22 mm × 90 mm × 2 pcs
Audio Output 10 W [5 W + 5 W] (10 % THD)
LCD Display panel 42-inch VA panel (LED backlight),
16:9 aspect ratio
50-inch VA panel (LED backlight),
16:9 aspect ratio
Screen size 930 mm (W) × 523 mm (H) × 1,067 mm
(diagonal)
1,095 mm (W) × 616 mm (H) × 1,257 mm
(diagonal)
(No.of pixels) 2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
Operating condition
Temperature 0 °C - 40 °C 0 °C - 40 °C
Humidity 20 % - 80 % 20 % - 80 %
Applicable signals
Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i ·
50p · 24p · 25p · 30p · 24sF
PC signals VGA, SVGA, XGA, SXGA
UXGA ···· (compressed)
Horizontal scanning frequency 30 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
HDMI TYPE A Connector
DVI-D IN
AUDIO
DVI-D 24 Pin
Content Protection
Stereo mini jack (M3) × 1
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
0.5 Vrms, Shared with PC IN
PC IN
AUDIO
High-Density Mini D-sub 15 Pin
Stereo mini jack (M3) × 1
G with sync 1.0 Vp-p (75 Ω)
G without sync 0.7 Vp-p (75 Ω)
B: 0.7 Vp-p (75 Ω)
R: 0.7 Vp-p (75 Ω)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
0.5 Vrms, Shared with DVI-D IN
LAN RJ45 10BASE-T/100BASE-TX, compatible with PJLink™
SERIAL IN External Control Terminal
D-sub 9 Pin RS-232C compatible
AUDIO
OUT
Stereo mini jack (M3) × 1
Output level: Variable (- 0 dB)
0.5 Vrms
[INPUT 1 kHz / 0 dB, 10 kΩ Load]
Dimensions (W × H × D) 957 mm × 564 mm × 49 mm 1,121 mm × 655 mm × 49 mm
Mass (weight) approx. 13.5 kg approx. 18.0 kg
Notes:
• Design and speci cations are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below. EN55022, EN55024, EN61000-3-2, EN61000-3-3.
Speci cations

Table of Contents

Related product manuals