Panasonic TH-42LFE7W - Using Web Browser Control; Before Using Web Browser Control; Access from Web Browser

4949
Unit Setup
Set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 41, 42)
Computer Setup
Disable the proxy server settings and enable JavaScript.
You can use a Web browser to control the unit and set up a network and password.
Access to the TOP screen of the Web browser control using a Web browser.
To use the Web browser control, the unit and computer setups are required.
(Windows) (Macintosh)
Disable proxy server settings
1 Display [Internet Properties] window.
Click [Start] – [Control Panel] – [Network and Internet]
– [Internet Options].
2 Click the [Connections] tab and then [LAN Settings].
3 Deselect the [Use automatic con¿ guration script] and
[Use a proxy server for your LAN] boxes.
4 Click [OK].
Enable JavaScript
1 Display [Internet Properties] window.
Click [Start] – [Control Panel] – [Network and Internet]
– [Internet Options].
2 Set the security level on the [Security] tab to [Default
Level]. Alternatively enable [Active scripting] from the
[Custom Level] button.
Disable proxy server settings
1 From the [Safari] menu, click [Preferences].
General screen is displayed.
2 From the [Advanced] tab, click the [Change
Settings…] button next to [Proxies]. Click [Proxies]
and set up a proxy server.
3 Deselect the [Web Proxy] and [Automatic Proxy
Con¿ guration] boxes.
4 Click [Apply Now].
Enable JavaScript
1 Display [Security] of Safari.
2 Select [Enable JavaScript] under [Web content].
1 Start your Web browser.
2 Enter the IP address set with the “LAN Setup” of the unit.
(see page 42)
3 Enter the user name and password when the
Authentication screen is displayed.
Authentication screen
4
Click [OK].
After logged in, the TOP screen of the Web browser
control is displayed. (see page 50)
Notes:
Ɣ
The password used here is the same password
used for command control and the PJLink™
security authentication.
Ɣ
Default user name and password are as follows:
User name: user1
Password: panasonic
Ɣ
The password can be changed on the Password
Setup screen after logging in (see page 51). The
user name cannot be changed.
Ɣ
Under no circumstances, Panasonic Corporation
or it's associated companies will ask customers
their password directly.
Even if you are asked directly, please do not
reveal your password.
Ɣ
This function is disabled in standby mode.
Using Web Browser Control
Before Using Web Browser Control
Access from Web Browser