Panasonic TH-42PA20

34
3
Press to adjust Pos./Size.
Press to exit from adjust mode.
Adjusting Position and Size
Adjusting screen
1 Press to display the Setup menu.
2 Press to select H-Pos/H-Size/V-
Pos/V-Size/Clock Phase.
H-Size
V-Size
H-Pos
V-Pos
Flickering and distortion can be eliminated by using the Position Left
“ ”
or Right
“ ”
button
to carry out adjustment.
Clock Phase
When the Position Left
“ ”
button is pressed.
When the Position Left
“ ”
button is pressed
When the Position Right
“ ”
button is pressed
When the Position Right
“ ”
button is pressed.
While the “Setup” menu is displayed, if either the N button on the remote control is pressed at any time or the or
button is pressed while the yellow cursor is at the “Normalise” position, then all adjustment values are returned to the
factory settings.
Sync
H & V : To synchronize by the horizontal and vertical signals from your PC.
on G : To synchronize by the green signal form your PC (if available).
1 Press TV/AV button.
2 Press Yellow (AV3) button to
access ‘PC’ mode.
N
Helpful Hint ( /
Normalise
Normalisation)
Picture Adjustments (PC mode)
When the Position Left
“ ”
button is pressed.
When the Position Left
“ ”
button is pressed.
When the Position Right
“ ”
button is pressed.
When the Position Right
“ ”
button is pressed.
1 2 3
4 5 6
7 8 9
0
C
SET UP
TV/AV
Normal
Setup
Normalise
H-Pos
H-Size
V-Pos
V-Size
Clock Phase
Sync
H & V