7
1
2 3
4
5 6
7
C
8 9
0
Supplied Accessories
•
Operating Instruction book
•
Remote Control Transmitter
(N2QAJB000081)
•
AC cord
•
Batteries for the Remote
Control Transmitter
(2 × R6 (UM3) size)
•
Guarantee Card
Check the accessories before installations.
Slide off the battery cover Insert batteries - note correct
polarity (+ and -)
Replace the cover
Fitting remote control batteries
123
• Make sure that the batteries are fitted the correct way round.
• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni - Cad) batteries.
Two “R6 (UM3)” size
•
Ferrite core
(small size) × 5
•
Ferrite core
(large size) × 3
Installing the ferrite core (Small size)
Pull back the tabs
(in two places)
Open
Press the cable
through and close
1
2
3
Installing the ferrite core (Large size)
Pull back the tabs
(in two places)
Open
Press the cable
through and close
1
2
3