Panasonic TH-42PF50E

65
Shipping condition
Shipping
YES NO
Options
Shipping
[from the unit]
1 Press the MENU button till the Setup menu is displayed.
2 Press the Volume Up“+” or Down“–” button to select “OSD Language”.
3 Press and hold the ENTER button till the Shipping menu is displayed.
4 Press the Volume Up“+” or Down“–” button to select “YES”.
5 Press the ENTER button and wait for 10 sec.
6 Press the power switch (
) on main unit to turn the power off.
This function allows you to reset the unit to the factory setting.
1
2
3
4
Press to display the Setup menu.
Press to select “OSD Language”.
Press for more than 3 seconds.
Press to select “Shipping”.
Press to display the Shipping menu.
Press to select “YES”.
Press to con rm.
Applicable Input Signals
Video input (VIDEO)
Signal name
Horizontal Vertical
frequency(kHz) frequency(Hz)
1 NTSC 15.73 59.94
2 PAL 15.63 50.00
3 PAL60 15.73 59.94
4 SECAM 15.63 50.00
5 Modi ed NTSC 15.73 59.94
Wait for 10 seconds.
5
6
Press the power switch ( ) on main unit to turn the power off.
1/2
Signal
3D Settings
Screensaver
Extended life settings
Input label
OSD Brightness
5
OSD Language
No activity power off
Disable
Menu Display Duration
30 S
Component/RGB-in select
RGB
Setup
ECO Mode settings
Function Button Settings
English
(
UK
)