Panasonic TH-42PH11MK - Signal Menu Options

3D Y/C Filter (NTSC)
On
1/2
Signal
Screensaver
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD Language English
(
UK
)
Component/RGB-in select
RGB
Input label
Power save
Setup
3D Y/C Filter (NTSC)
Colour system
Signal
On
Auto
Cinema reality
Panasonic Auto (4:3)
Off
4:3
[
AV
]
Noise reduction
Off
Refresh Rate
100 Hz
Cinema reality
Signal
Off
H-Freq.
V-Freq.
kHz
Hz
63.98
60.02
Noise reduction
Off
[
Digital
]
Signal Format 1280×1024/60
Refresh Rate
100 Hz
Cinema reality
Signal
Off
[
Component
]
Noise reduction
Off
XGA Mode
1024 × 768
H-Freq.
V-Freq.
kHz
Hz
63.98
60.02
Signal Format
1280×1024/60
Refresh Rate
100 Hz
Sync
Signal
H-Freq.
V-Freq.
kHz
Hz
63.98
60.02
Signal Format
1280×1024/60
[
RGB
]
Cinema reality
Noise reduction
XGA Mode
Refresh Rate
100 Hz
Auto
Off
Off
1024 × 768
34
3D Y/C Filter – For NTSC AV images
Select “Signal” from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]” menu is displayed.)
Press to select the “3D Y/C Filter (NTSC)”
Press to set On / Off.
Note:
When On, this setting only affects NTSC input signals.
Setup for Input Signals
Signal menu
Press ACTION ( ) button
For Video (S VIDEO) For RGB
For Component For Digital
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
3
4
Press to display the Setup menu.
Press to select the “Signal”.
Press to display the Signal menu.
2
1
Note:
“Signal” setup menu displays a different setting condition for each input signal.