Panasonic TH-42PH11MK - Refresh Rate and Noise Reduction

Advanced NR
[
AV
]
Mosquito NR
P-NR
Block NR
Off
Off
Off
Advanced NR
[
Digital
]
Mosquito NR
P-NR
Block NR
Off
Off
Off
Advanced NR
[
Component
]
Mosquito NR
P-NR
Block NR
Off
Off
Off
Advanced NR
[
RGB
]
Mosquito NR
P-NR
Block NR
Off
Off
Off
()
Noise reduction
Off
Noise reduction
Advanced
Refresh Rate
100 Hz
36
Press to select “Noise reduction”.
Press to select “Off”, “Min” , “Mid” , “Max” , “Advanced”.
Sets the following three NR (Noise Reduction) functions together.
P-NR, Mosquito NR, Block NR
Noise reduction
Setup for Input Signals
Sets the three NR functions separately.
Press to select “Advanced”.
Press to enter Advanced NR.
1
Press to select P-NR, Mosquito NR
or Block NR.
Press to select “Off”, “Min”, “Mid”,
“Max”.
2
P-NR: Automatically reduces unwanted picture noise.
Mosquito NR : Reduces mosquito noise around subtitles on MPEG videos.
Block NR: Reduces block noise when playing MPEG videos.
Notes:
• Noise reduction cannot be adjusted while a PC signal is being applied.
• Block NR cannot be adjusted while a HD signal is being applied.
Advanced NR

This function sets the refresh rate of the display.
This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.
100 Hz: Reduce screen  icker.
50 Hz: Enhance the resolution of moving images.
Note:
It is recommended to set to 100 Hz normally.
Refresh Rate
Press to select “Refresh Rate”.
Press to adjust.